What’s the Secret to Keeping Hardwood Shiny?
A good wood floor shine is achieved, first and foremost, by keeping your floors well-cleaned on a regular basis. If, after dusting and spray mopping with a microfiber mop, you still want to add more shine, then a high or low-gloss floor polish can be applied.
Last Updated: May 25, 2023, by: Rob Parsell
Welcome back to another “How-to” guide from the Home Flooring Pros. This week we’re going to look at the age-old question of how to make hardwood floors shine. When you first install hardwood flooring, it has that never been stepped on brilliance that you’ll be familiar with from all the interior design magazines and websites, but it doesn’t take long for that shine to fade. So how do you clean hardwood until they shine again?
Hardwood floor finishes range from a light-reflecting gloss to a more subdued satin or matte that shows off the wood’s grain. Any finish needs regular care to maintain its beauty. Let’s start with how to clean a hardwood floor to make it shine. If you try these hardwood floor cleaning tips and they don’t restore the shine, then re-coating or refinishing hardwood flooring are the next steps to consider. We have a dedicated guide to hardwood refinishing costs.
CLEANING HARDWOOD FLOORS PROPERLY IS THE KEY TO MAKING THEM SHINE
When the finish is in good condition, these hardwood floor cleaning steps will restore their shine.
Hardwood Floor Cleaning Steps:
- Spot-treat stuck-on food and dirt: A few drops of water used to soften stuck dirt is preferred to a harsh cleaner or scrubbing tool. Sprinkle a few drops directly onto the spot, wipe away the dirt with a soft cloth within five minutes, and dry the floor.
- Get the loose dirt off daily to weekly: Not only does dust and dirt make a floor dingy, walking on the debris will slowly but surely scratch and dull the finish. A dry microfiber mop is preferred for loose dirt, but one slightly damp works well for lightly-soiled floors. There are several quality microfiber mops with washable heads, and some are part of floor care kits that include a bucket and spin mechanism to remove excess water. If gaps exist between planks, use a hard-floor vacuum or lightweight multi-surface vacuum with the rotating brush turned off before mopping. This step should be done at least weekly in homes with a “shoes off” policy, more frequently when shoes are worn inside.
- Microfiber mops: $14-$25
- Microfiber mop kits: $40-$65
- Use a mild cleaner when needed: When floors remain dingy after light mopping, they might need a general cleaning. Avoid soap because it can leave a residue behind that dulls the floor’s gleam and collects dirt. A mild detergent-free cleaning solution is best. Here’s how to clean hardwood floors with a mild cleaner:
- In a bucket, add warm water and white vinegar in a 16:1 ratio, or about 1/4 cup of white vinegar per quart of water. Swirl the water to mix thoroughly.
- Dip your mop, and wring it thoroughly. A sponge works well too, but you’ll have to do the work on hands and knees.
- Mop areas you’re comfortable working from one position, perhaps 2-3 feet in front of you and 4-6 feet side to side.
- Dump and refill your bucket as needed to ensure you’re mopping with clean solution
- Rinse the mop head in fresh water or change it when it’s noticeably dirty.
- If you’re leaving water behind, dry it with a towel, and wring your mop or sponge more thoroughly next time
- For very dirty floors, you might need to strengthen the mix to a 1/2-cup white vinegar (8:1 ratio) or full-cup (4:1 ratio) per quart
- For older floors only, you might try adding a few drops of vegetable oil or essential oil to the mix to help make the hardwood flooring shine
If you opt for a hardwood floor cleaner, make sure it is one approved by the manufacturer of the hardwood flooring, if possible, or recommended by a flooring expert you trust.
Here’s a list of the products mentioned and their costs:
- Spray bottle: $3-$6
- Gallon of white vinegar: $4-$10, also available in pre-mixed 20% (4:1 ratio) and 30% (about 2:1 ratio) solutions for up to $25 per gallon
- Hardwood floor cleaner: $5-$9 per quart
HARDWOOD FLOORING NO-NOs
There are a couple things you should not do when maintaining hardwood floors:
- Don’t use a steam cleaner because it will force water between the planks and might ultimately cause warping
- Don’t wax a hardwood floor with a polyurethane finish because it will dull the floor, not make it shine
If you’re not sure what finish your floor has, avoid wax. If you suspect a buildup of wax is dulling the floor, then mineral spirits ($10/quart or $25/gallon) on a cloth followed by wiping with a clean, damp cloth might work without harming the floor’s natural finish. If you can’t get the wax off or the mineral spirits harm the floor’s finish, you’re left with the more aggressive options discussed next.
WHEN CLEANING ISN’T ENOUGH TO MAKE HARDWOOD SHINE
When the floor’s finish is worn to the point that cleaning doesn’t restore the shine, you have two options:
- Recoating the floor: This involves lightly sanding the surface, cleaning it and applying a new coat of finish. This is a good option when the floor is generally free of deep scratches and stains.
- Refinishing the floor: This involves sanding away the surface including stains and scratches, cleaning it and applying one or two fresh finish coats. This is the only option for badly marred hardwood flooring.
Visit our hardwood flooring cleaning and maintenance page for more options.
About the Author:
Rob joined the Home Flooring Pros team in 2014 and is a freelance writer, specializing in flooring, remodeling and HVAC systems (read more).
“I’m the son of an interior designer and picked up an eye for design as a result. I started hanging wallpaper and painting at 14 and learned enough on the job to be the general contractor on two homes we built for our family and did much of the finish plumbing, electrical, painting, and trim work myself.”